Description

Spirent – SPT-2000A Features & Specifications:

Spirent TestCenter contains multiple hardware and software components. The SPT-2000A chassis is designed for easy transportation, with a removable carrying handle and a loaded weight of 25 pounds. The SPT-2000A can be optionally rack-mounted and has 2 slots that can support up to sixteen 10/100/1000 Mbps Ethernet ports, sixteen Gigabit Ethernet ports, 2 10GbE ports, or a mixture of these port types. Compatible with all of the Spirent TestCenter product line components; permits hot swap on all test modules for easy service or replacement while the chassis is fully operational; and can be easily remotely managed through an IP network.

• Comprehensive temperature monitoring with visual indicators (9U Chassis)
• Supports hot swap of all test modules„
• Supports multi-user operation„
• Synchronize up to 255 chassis for high density test beds
• Automatically calibrate synchronization between chassis
• Works with the Spirent TestCenter software applications for comprehensive
• functional testing, conformance testing and performance analysis all in one system
• Provides GPS (Global Positioning System), CDMA (Code Division Multiple Access) TIA/EIA–95B, external timing reference support and NTP (Network Timing Protocol)
• Supports 10/100/1000 Mbps (half/ full duplex in 10/100 mode) Ethernet
• connections to a host PC, and can be set for auto-negotiation or speed is completely configurable 19” rack-mountable„
• Easy to read LCD (available on SPT-9000A) provides system status, errors and other configuration information
• Replaceable fan tray (available on„SPT-9000A)
• Optional redundant power (available onSPT-9000A)

• Hot swappable modules
• High-speed backplane for parallel downloads
• Multiple users per test module for greater efficiency of resources
• 19-inch rack-mountable
• Spirent TestCenter 2U, 2-slot portable chassis
• Supports up to 16 10/100/1000 Mbps Ethernet ports, 16 Gigabit Ethernet ports, 24 dual media Gigabit Ethernet ports, 4 10GbE, 2 UniPHY, 2 WAN ports, ports or a combination of these port types. The SPT-2000A-HS can support 4 UniPHY, 4 WAN ports or any combination of all test modules.
• Portable design with an easy to remove handle for optional rack mounting
• Horizontal module slot orientation„
• Built-in module locking securitymechanism to prevent unwanted removal of modules
• Power: 100-120/220-240 VAC. Nominal 115 or 230 VAC, 50-60 Hz., 12A MAX Inlet AC requirement 1/2 115V @15A (863W AC nominal) circuit, output DC power of power supply is 500W
• BTU Requirements: 2500 BTU/h (assume 80% heat load for air conditioning)
• Dimensions: 15”W x 3.5”H x 21”D (38.1W x 9H x 53.3D cm)
• Weight: 25 lbs. (11.3 kg) fully loaded. Shipping weight approx. 28 lbs. (12.7 kg)
• Operating environment: 59° to 104° F (15° to 35° C); 20% to 80% relative humidity. Must have 6-inch space for unimpeded airflow into the chassis fans and blank panels inserted on empty slots. Note: The EDM-2003A/B and the MSA-2001A/B modules when installed in
  the SPT-2000A chassis have a maximum operating environment of 86 degrees (30° C). There are no restrictions on SPT-2000A-HS.
• Front panel LEDs: power, fan, link, status, and over temperature
• Back panel LEDs: activity/collision, link/ error, 10/100Mbps, and 1000Mbps
• Ethernet connection: 10Base-T connector 10/100/1000 Mbps (half/full duplex in10/100 mode)
• Connectors: DB9 serial console; RJ-45 expansion in/out connectors for multiple chassis connection; RJ-45 BITS clock connector; connectors to attach to an external GPS or CDMA receiver