Description
GDS-2062 Series pick up signals even in the most extreme cases, powered by 1GSa/s real time and 25GSa/s equivalent sampling rate combined with 3 types of acquisition modes: sample, peak detect, and average. 25k points of deep memory collects more information of a given waveform, guiding us into further signal details. 4 types of flexible triggers add another signal capturing flexibility: edge , video ( NTSC, PAL, SECAM ) with line selection, pulse-width, and delay/event using external trigger signal ( for 2CH models
Features
- 60, 100, 200 MHz Bandwidth
- 2 or 4 Input Channels
- 1 GS/s Real-Time and 25 GS/s Equivalent-Time Sampling
- Maximum 25k Points Record Length
- Large 5.6-in TFT Color Display
- USB Host/Device: USB Printer and USB Flash Drive Support
- Battery Operation (optional)
- Frequency Range/ Bandwith 60 MHz
- Max. Vertical Sensitivity 5 V/div
- Min. Vertical Sensitivity 2 mV/div
- Number of Channels 4 CH
- Other Features Color – GPIB (optional)
- Record Length 25k/CH
- Sample Rate 1 GSa/s
- Type (D/A) Digital
Specifications
GDS-2062/2064 | GDS-2102/2104 | GDS-2202/2204 | ||
Channels | 2 / 4 | 2 / 4 | 2 / 4 | |
Bandwidth | DC – 60 MHz (-3 dB) | DC – 100 MHz (-3 dB) | DC – 200 MHz (-3 dB) | |
Rise Time | 5.8 ns Approx. | 3.5 ns Approx. | 1.75 ns Approx. | |
Sensitivity | 2 mV/div~5V/div (1-2-5 increments) | |||
Accuracy | ±(3% x [Readout] + 0.05 div x Volts/div | |||
Input Coupling | AC, DC, & Ground | |||
Input Impedance | 1 M ±2%, -16 pF | |||
Polarity | Normal & Input | |||
Maximum Input | 300 V (DC + AC peak), CATII | |||
Waveform Signal Process |
+ , – , x , / , FFT | |||
Offset Range | 2 mV/div ~ 20 mV/div : ±0.5V; 50 mV/div ~ 200 mV/div:±5V; 500 mV/div ~ 2 V/div : ±50 V; 5 V/div: ±300V | |||
Bandwidth Limit | 20 MHz (-3 dB) | |||
Trigger | Sources | CH1 , CH2 , Line , EXT(2CH Only) / (CH3,CH) | ||
Modes | Auto-Level, AUTO, NORMAL, SINGLE, TV, Edge, Pulse Width Time-delay (2CH Only), Event-delay (2CH Only) | |||
Coupling | AC , DC , LF rej. , HF rej. , Noise rej. | |||
Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV 25MHz ~ 60/100/200MHz : Approx. 1div or 10mV |
|||
Horizontal | Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div | ||
Modes | MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y | |||
Accuracy | ±0.01% | |||
Pre-Trigger | 20 div maximum | |||
Post-Trigger | 1000 div | |||
Signal Acquisition |
Real-Time Sample Rate |
1 GS/s | ||
Equivalent Time Sample Rate |
25 GS/s | |||
Vertical Resolution | 8 Bits | |||
Record Length | 25K Dots Maximum | |||
Single Shot Bandwidth |
100 MHz | |||
Acquisition Mode | Sample, Peak Detect, Average, Accumulate | |||
Peak Detection | 10 ns | |||
Average | 2 • 4 • 8 • 16 • 32 • 64 • 128 • 256 | |||
Display | TFT LCD Type | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div | ||
Display Resolution | MAIN, WINDOW, WINDOW ZOOM, ROLL, SCAN, X-Y | |||
Display Graticule | ±0.01% | |||
Display Brightness | 20 div maximum | |||
Interface | GO/NO GO Output | Open Collector | ||
RS-232 | DB 9-pin male DTE RS-232 interface | |||
USB | Host: Pen Drive • Printer; Device: Support remote control | |||
GPIB (optional) | Fully programmable with IEEE488.2 compliance | |||
Power Source |
Line Voltage Range | 100 V ~ 240 VAC 48 Hz ~ 63 Hz, Auto select | ||
Battery Power (opt.) | Battery: 10.8 V Li Ion battery pack | |||
Charge Time: 12 hours from AC Line | ||||
Operating Time: 3 hours, depending on operating condition |
Reviews
There are no reviews yet.