Contact us: 1-855-200-TEST (8378) or sales@testworld.com

Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz

Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz

Description

Intelligent menu guidance for maximum ease of operation
◆ Large-size LC display
◆ Menu-guided operation with all menu levels being shown at a glance
◆ Two menu memories to speed up operation

User-friendly details
◆ Digital RF, AF and level sweep
◆ Storage of 50 complete instrument setups
◆ Combination of any modulation modes possible
◆ Ultra-low RF leakage
◆ RF control output

Unambiguous results due to high spectral purity
The outstanding features of the Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz is the extremely low SSB phase noise of <–105 dBc (1 Hz) at 10 GHz (10 kHz from carrier) as well as nonharmonics of <–60/54 dBc up to/ above 20 GHz. The high harmonics rejection and the complete absence of subharmonics below 20 GHz cut out timewasting measurements such as occur with inferior signal generators.

Minimum level error
A highly precise level is required, for example, for measurements and calibration of receivers. A controlled and frequency-response-compensated output level is a basic prerequisite for setting accuracy. In conjunction with a precision attenuator (option ¸SMP-B15/-B17), an extremely high level accuracy is ensured throughout the setting range (<±0.9 dB at 0 dBm in the frequency range 10 MHz to 40 GHz).

Stable output frequency
The crystal reference built-in as standard ensures an accurate and low-drift output frequency. The Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz can also be fitted with an oven-controlled crystal oscillator (option ¸SMP-B1, OCXO) to meet the most exacting requirements.

High output level eliminates the need for add-on units
A large number of microwave measurements requires mainly one thing: a high output level, which until now has only been possible with expensive add-on amplifiers. Owing to their high output levels, the Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz models feature sufficient reserves for compensating the attenuation of long cables as well as the losses of power splitters and directional couplers.

Our standard:
0.1 Hz frequency resolution
A high frequency resolution is required especially for scientific applications and in industrial research, e.g. for surface measurements of materials using radar equipment. The Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz is setting standards with a resolution of 0.1 Hz throughout its frequency range, and even above 20 GHz.

Variety of applications
The Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz is ideal for the following applications:
◆ Substitution of local oscillators
◆ Measurements on nonlinear components such as frequency multipliers or high-level mixers
◆ Driving of travelling wave tubes (TWTs) and other power stages
◆ Interconnection of several signal generators for intermodulation measurements
◆ Tracking generator for spectrum and network analyzers

High-quality shielding
Sensitivity measurements on low-noise satellite receivers can only be made with absolutely RF-leakage-proof signal sources. The comprehensive shielding of the Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz ensures extremely low RF leakage.

Frequency and phase modulation
The Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz is fitted as standard with a broadband FM modulator covering a modulation frequency range up to 5 MHz for deviations up to 10 MHz (20 MHz above 20 GHz). In addition, a precision FM/ϕM modulator (option ¸SM-B5) with a modulation frequency range of up to 1 MHz and maximum deviation of up to 1 MHz (2 MHz for f >20 GHz) is available for testing communication receivers and for scientific applications.

Reviews

There are no reviews yet.

Be the first to review “Rohde & Schwarz SMP02 High Output Microwave Signal Generator, 20 GHz”