Description

Its wide dynamic range makes the Rohde & Schwarz FSU26 High Performance RF Spectrum Analyzer an ideal tool for base station development and testing. That plus the excellent characteristics already incorporated in the standard model, e.g. < 0.3 dB total measurement uncertainty, gated sweep and IF power trigger.

Due to its low phase noise and low noise floor, the Rohde & Schwarz FSU26 High Performance RF Spectrum Analyzer is the ideal instrument for measurement tasks in RADAR development and when searching for spurious emissions.

A full choice of detectors for adaptation to a wide range of signal types, versatile resolution filters and additional applications make the Rohde & Schwarz FSU26 High Performance RF Spectrum Analyzer a multi-purpose easy-to-use measurement tool.

Key facts

• 20 Hz to 26 GHz
• TOI > 20 dBm, typ. +25 dBm
• 1 dB compression: +13 dBm (0 dB RF attenuation)
• Displayed average noise level: –152 dBm at 2 GHz; –148 dBm at 26 GHz (1 Hz bandwidth)
• Typ. 77 dB ACLR for 3GPP, typ. 84 dB with noise correction
• Phase noise: typ. –160 dBc (1 Hz) at 10 MHz carrier offset
• Noise correction

Whether in synthesizer development or frontend design, additional applications add to the Rohde & Schwarz FSU26 High Performance RF Spectrum Analyzer functionality  while user-friendliness is maintained.

Full choice of detectors
Full choice of detectors for adaptation to a wide range of signal types

• RMS
• auto peak
• max. peak
• min. peak
• sample
• average
• CISPR-AV
• CISPR-RMS
• QPK (quasi-peak)

Versatile resolution filters
The most versatile resolution filter characteristics and largest bandwidth found in a spectrum analyzer:

• Standard resolution filters from 10 Hz to 50 MHz in steps of 1, 2, 3, 5
• FFT filters from 1 Hz to 30 kHz
• 39 channel filters with bandwidths from 100 Hz to 5 MHz
• RRC filters for NADC and TETRA
• EMI filters: 200 Hz, 9 kHz, 120 kHz, 1 MHz
• Channel filter in line with most standards, e.g. EN 300 328