Description
Teledyne LeCroy – D11000PS extends the full signal acquisition performance of the SDA 11000 to the probe tips. With 11 GHz system bandwidth, the probe enables direct measurement of high-speed serial data streams up to 6.25 Gb/s. The D11000PS also provides 11 GHz system bandwidth when used with the SDA 18000.
Teledyne LeCroy – D11000PS Specifications
- Bandwidth, System, -3 dB, 11 GHz (Typical)
- Rise Time, System < 50 ps (Typical)
- Rise Time, Probe only < 40 ps
- Attenuation, Nominal ÷3
- LF Attenuation Accuracy 2% (20–30 ̊ C)
- Output Zero < 15 mV referred to input
- Noise, System 5 mV rms (Typical)1
- Differential Mode Range ±1 V
- Common Mode Range ±4 V, solder in tip ±2 V, SMA cable input
- Input Resistance at DC, 40 kΩdifferential
- (Solder-In lead) 20 kΩ each side to ground
- Minimum Input Impedance > 175Ω
- (Solder-In lead, to 11 GHz) (Refer to graph)
- Input Impedance, 50Ω
- (SMA cable input)
- Input VSWR < 1.5:1 DC–6 GHz
- (Typical, each lead to ground) < 2.0:1 6 GHz–11 GHz
- CMRR, (Typical) > 40 dB DC–1 GHz> 30 dB 1 GHz–4 GHz> 20 dB 4 GHz–11 GHz
Teledyne LeCroy – D11000PS Applications
Attention to fine details during the D11000PS design process has resulted in several “ease of use” features. A common mode measure feature allows the user to measure the average common mode component with a single click in the probe control menu. AutoColor ID lights an indicator in the probe body, matching the color of the waveform trace. When multiple channels are used,
this feature instantly identifies which waveform corresponds to which probe.
Reviews
There are no reviews yet.