Contact us: 1-855-200-TEST (8378) or sales@testworld.com

Keysight (Agilent) N5182B 6 GHz RF Vector Signal Generator

Keysight (Agilent) N5182B 6 GHz RF Vector Signal Generator

Description

Specifications represent warranted performance of a calibrated instrument that has been stored for a minimum of 2 hours within the operating temperature range of 0 to 55 °C, unless otherwise stated, and after a 45 minute warm-up period. The specifications include measurement uncertainty. Data represented in this document are specifications unless otherwise noted.

Typical (typ) describes additional product performance information that is not covered by the product warranty. It is performance beyond specifications that 80 percent of the units exhibit with a 90 percent confidence level at room temperature (approximately 25 °C). Typical performance does not include measurement uncertainty.

Nominal (nom) values indicate the expected mean or average performance, or an attribute whose performance is by design, such as the 50 ohm connector. This data is not warranted and is measured at room temperature (approximately 25 °C).

Measured (meas) describes an attribute measured during the design phase for purposes of communicating expected performance, such as amplitude drift vs. time. This data is not warranted and is measured at room temperature (approximately 25 °C).

Key Feature of N5182B:

Frequency range : 9 kHz to 6 GHz
Resolution : 0.001 Hz
Phase offset  : Adjustable in nominal 0.1° increments

SCPI mode  ≤ 5 ms, typical    ≤ 1.15 ms   ≤ 1.05 ms
List/step sweep mode    ≤ 5 ms, typica    l ≤ 900 μs    ≤ 800 μs

1. Time from receipt of SCPI command or trigger signal to within 0.1 ppm of final frequency or within 100 Hz, whichever is greater.
2. With internal channel corrections on, the frequency switching speed is < 1.3 ms, measured for list mode and SCPI mode cached frequency points. For the initial frequency point in SCPI mode the time is < 3.3 ms, measured. The instrument will automatically cache the most recently used 1024 frequencies. There is no speed degradation for amplitude-only changes.
3. Specifications apply when status register updates are off. For export control purposes CW switching speed to within 0.05% of final frequency is 190 μs (measured).

 

Reviews

There are no reviews yet.

Be the first to review “Keysight (Agilent) N5182B 6 GHz RF Vector Signal Generator”