Contact us: 1-855-200-TEST (8378) or sales@testworld.com

Keysight 54853A 2.5GHz 4CH 20GSa/s Infiniium Oscilloscope

Keysight 54853A 2.5GHz 4CH 20GSa/s Infiniium Oscilloscope

Description

If you are an experienced scope user, you know that your measurements are only as good  as your probing system. And  as bandwidth increases, it’s increasingly important to ask the question: am I measuring  my circuit or my scope probe? Nothing is more frustrating than chasing down an apparent design problem, only to find that it was caused by an inferior scope probe. Together, the newest Agilent Infiniium scopes and the breakthrough Agilent InfiniiMax high-performance probing systems offer an end-to-end measurement system with
unmatched performance, accuracy, and connectivity. The result is measurements you can trust and better insight into your circuit behavior.

The Keysight (Agilent) 54853A Infiniium oscilloscope and InfiniiMax 1134A probing system, (1134A probe amp plus the E2668A single-ended connectivity kit and/or E2669A differential connectivity kit), provides full real-time bandwidth of up to 7 GHz and is supported on every channel by the 20 GSa/s sample rate. This industry-leading sample rate produces more accurate and repeatable measurements, avoiding measurement error and signal alliasing due to under sampling of the waveform. The innovative InfiniiMax probing system supports even the most demanding mechanical access requirements without sacrificing performance.

Features of the Keysight (Agilent) 54855A:

  • 6 GHz hardware bandwidth (guaranteed specification) and 7 GHz bandwidth (typical characteristic) with option-008 enhanced bandwidth software
  • 20 GSa/s sample rate on all four channels simultaneously
  • Up to 1 Mpts MegaZoom deep memory at all sample rates and 32 Mpts MegaZoom deep memory at 2 GSa/s and slower sample rates, after-purchase memory upgrade available
  • Trigger jitter as low as 1.0 ps rms
  • Each InfiniiMax probe amplifier supports both differential and single-ended measurements for a more cost-effective solution
  • Unrivaled InfiniiMax probing accessories support browsing, solder-in, and socket use models at the maximum performance available
  • The 7 GHz InfiniiMax 1134A probe and E2668A/E2669A connectivity kits (all sold seperately) are recommended for the Infiniium 54855A oscilloscope

Specifications

  • 4 Channels
  • 6 GHz Bandwidth
  • 20 GS/s Sample Rate on all 4 channels simultaneously
  • Up to 1 Mpts MegaZoom deep memory at 20 GS/s
  • Up to 32 Mpts MegaZoom deep memory at 2 GS/s and slower sample rates
  • 1 mV/div to 1 V/div Sensitivity
  • 70 ps Rise Time (10% to 90%)
  • Trigger jitter as low as 1.0 ps rms

Reviews

There are no reviews yet.

Be the first to review “Keysight 54853A 2.5GHz 4CH 20GSa/s Infiniium Oscilloscope”