Description
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
Accurate current measurements become more and more critical when troubleshooting electric, electronic, and automotive circuits.
The Fluke 80i-110s AC/DC Current Probe is designed to provide you with safe, high accuracy measurements for a wide range of applications. The specially designed builtin safety features such as the 600 V rms rating at the input jaws, output cable, and BNC
connector enhance work safety in industrial and commercial power distribution systems. The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems. The 80i-110s accurately reproduces current waveforms as they occur. Connect the clamp to a Fluke ScopeMeter
Test Tool or other waveform recording device like a Fluke Power Harmonics Analyzer, to clearly see distorted waveforms
that result from non-linear loads such as computers, adjustable speed motor drives, and electronic ballasts for fluorescent
lighting.
Feature
- Current Range: 0.1 to 100A DC or 0.1 to 70A AC
- Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
40A to 80A +/- 12% of reading + 50mA
80 to 100A +/- 15% of reading
- Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
- Bandwidth: 1Hz to 20kHz
- Working Voltage: 600V AC rms
- Maximum Conductor Size: 11.8 mm (.46 inch) diameter
- Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Specifications
Nominal current range |
|
Continuous current range |
|
0.1 A – 10 A AC/DC |
|
1 A – 100 A AC/DC |
|
Maximum Non-Destructive Current |
|
Lowest measurable current |
|
Basic Accuracy |
|
3% + 50 mA (@ 10 A) |
|
(% reading + floorspec) |
|
Useable frequency |
|
Output level(s) |
|
Zero error adjustment |
|
Safety Specifications |
Safety |
|
CAT II, 600 V |
|
CAT III, 300 V |
|
Maximum voltage |
|
Mechanical & General Specifications |
Warranty |
|
Battery Life |
|
Maximum conductor diameter |
|
Output cable length |
|
Reviews
There are no reviews yet.